Hotbed Glass Corner Holder With Position Adjuster – Full Set For Anet A8 A6 3D Printer Model
The file 'Hotbed Glass Corner Holder With Position Adjuster – Full Set For Anet A8 A6 3D Printer Model' is (stl) file type, size is 21.2KB.
The file 'Hotbed Glass Corner Holder With Position Adjuster – Full Set For Anet A8 A6 3D Printer Model' is (stl) file type, size is 21.2KB.
Best corner set for holding >=3mm glass plate on the Anet A8 / A6 hotbed. My recommendation is 4mm thick glass plate. Design based on excellent design by thfo and 3DMaka.
I used both attributed designs, however my glass plate was not perfectly cut, therefore it had some loose. Temporary fix was to use a clamp to hold it in place. Then I decided to do the modification so the imperfect plates can be still used without additional accessories.
I have included my modification as well original booties and corner designs to make an easy to use set. If you like the design please tip thfo and 3DMaka not me.
To have full set please print
If your glass is off more then 2mm then print more corners with position adjuster.
| Anet_A6_Glass_Bed_Corner_Holder_V2.stl | 26.2KB | |
| Anet_A6_Glass_Bed_Corner_Holder_With_Springs.stl | 47.7KB | |
| SpringBushing.stl | 32.9KB |
