Hot Wheels Wall Tower- Command Strips 3D Printer Model
The file 'Hot Wheels Wall Tower- Command Strips 3D Printer Model' is (stl) file type, size is 9.0KB.
The file 'Hot Wheels Wall Tower- Command Strips 3D Printer Model' is (stl) file type, size is 9.0KB.
I remixed this display for a hot wheels collection. This version uses 3m Command strips to hold to the wall. I have had good luck with the strips and they should hold the cars up. Print with the command sections down. You will need supports touching the build plate. There is a slight cutout to allow the display to sit closer to the wall. This can also be a free standing display.
My print only had the command supports partially between the top two platforms. This was not enough for support of the strips. This model has a larger place to attach the command strips The strips will need to be trimmed to fit.
I used:
3 walls
10% infill
supports
PLA
| hot_wheel_display_2.stl | 51.5KB |
![Adjustable Laptop Stand [WIP] 3D Printer Model](https://cdn.3axis.co/assets/30/1f/70/fa/301f70fa-927d-4e81-a417-15c117f9ae8f/images/309b58f2-4d73-4e98-b94b-a951a5559d03_thumb.jpg)
