Hot Wheel Track Set 3D Printer Model
The file 'Hot Wheel Track Set 3D Printer Model' is (stl) file type, size is 1.3MB.
The file 'Hot Wheel Track Set 3D Printer Model' is (stl) file type, size is 1.3MB.
Hot wheels tract set compleat with Launcher and End Gate.
| 30_Degrees_Bend_Track__Need_2_.stl | 58.7KB | |
| Car_Holder_.stl | 523.9KB | |
| Car_Holder_Pin_.stl | 92.6KB | |
| Car_Holder_Pin_Cap_.stl | 95.2KB | |
| Car_Holder_Pin_Leg_1__Need_2_.stl | 64.2KB | |
| Car_Holder_Pin_Leg_2_.stl | 96.0KB | |
| Frame_.stl | 161.8KB | |
| Gate_Pin_.stl | 90.9KB | |
| Gate_Pin_Cap_.stl | 95.6KB | |
| Gate_Pin_Leg__Need_2_.stl | 89.5KB | |
| Launcher_Track_.stl | 198.8KB | |
| Left_Foot_.stl | 3.2KB | |
| Left_Gate_.stl | 48.8KB | |
| Loop_Track_P_1_.stl | 296.1KB | |
| Loop_Track_P_2_.stl | 187.2KB | |
| Loop_Track_P_3_.stl | 187.1KB | |
| Loop_Track_P_4_.stl | 191.8KB | |
| Loop_Track_P_5_.stl | 392.2KB | |
| Loop_Track_P_6_.stl | 191.1KB | |
| Loop_Track_P_7_.stl | 191.1KB | |
| Loop_Track_P_8_.stl | 199.5KB | |
| Release_Handle_.stl | 150.0KB | |
| Release_Handle_Holder_.stl | 60.0KB | |
| Release_Handle_Holder_Cap_.stl | 63.6KB | |
| Right_Foot_.stl | 3.2KB | |
| Right_Gate_.stl | 48.8KB | |
| Rubber_Band_Holder__Need_2_.stl | 161.6KB | |
| Straight_Track_.stl | 22.9KB | |
| Track_End_Cap_.stl | 2.6KB | |
| Winner_Indicator_.stl | 93.0KB | |
| Winner_Indicator_Pin_.stl | 85.8KB |
