Hot Glue Sleeve, Shell Mold For JST-XH Connector 3D Printer Model
The file 'Hot Glue Sleeve, Shell Mold For JST-XH Connector 3D Printer Model' is (stl) file type, size is 174.2KB.
The file 'Hot Glue Sleeve, Shell Mold For JST-XH Connector 3D Printer Model' is (stl) file type, size is 174.2KB.
Mold for make cable shell for JST-XH or similar connectors. It work with PETG and glue not to hot, about 170-180°C
https://www.youtube.com/watch?v=vetH_S9nsAE&t=10s
1 - Put anti-attachement in the mold.
2 - Put the JST connector in the right piece.
3 - Put a few glue in the midle pieces.
4 - Place the right pieces and the center pieces together
5 - Fill the center pieces near full
6 - Put quick and tight the left pieces
7 - Wait 5 minutes for the cooling down
8 - Turn out and remove moulding protrusions
| moules-fiches-JST-XH-2S.stl | 192.9KB | |
| moules-fiches-JST-XH-3S.stl | 179.3KB | |
| moules-fiches-JST-XH-4S.stl | 225.4KB | |
| moules-fiches-JST-XH-5S.stl | 268.8KB | |
| moules-fiches-JST-XH-6S.stl | 283.0KB | |
| moules-fiches-JST-XH-7S.stl | 201.2KB | |
| moules-fiches-JST-XH-8S.stl | 202.6KB | |
| moules-fiches-JST-XH-Splited.stl | 270.6KB |
