I did this thing to be cut in my CNC, in 3mm MDF.
I believe it can also be printed in 3D and then glued with .. hot glue! That's why I've also attached the STLs. But notice I did not try to print in 3D.
I think Laser Cutting is perfect too :)
The pieces were glued together with wood glue, no need to nail or screw.
The design was inspired by a video from Jenni.Swiss but as he did not make the drawing available I did it from scratch with some adaptations.
As there are dozens of hot glue gun models I have attached STEP to anyone who wants to change.
| base_x1.dxf | 2.8KB | |
| base_x1.stl | 3.4KB | |
| hotglue_holder.step | 131.8KB | |
| internal_support_x2.dxf | 3.9KB | |
| internal_support_x2.stl | 2.2KB | |
| side_x2.dxf | 7.0KB | |
| side_x2.stl | 35.0KB | |
| tube_support_front_x1.dxf | 2.5KB | |
| tube_support_front_x1.stl | 684.0B | |
| tube_support_side_x1.dxf | 7.1KB | |
| tube_support_side_x1.stl | 684.0B |
