Hot Coals For Gloomhaven (1, 2, & 3 Hex) 3D Printer Model
The file 'Hot Coals For Gloomhaven (1, 2, & 3 Hex) 3D Printer Model' is (stl,STL) file type, size is 50.7MB.
The file 'Hot Coals For Gloomhaven (1, 2, & 3 Hex) 3D Printer Model' is (stl,STL) file type, size is 50.7MB.
UPDATE: 6/27/2018 Added new versions with smoothed edges and outer ridges restored (had been inverted during original lithophane process). Also added a thin version at ~2.5mm thick, normal version is ~5mm thick.
Hot Coals overlay tiles for Gloomhaven board game, 1, 2, and 3 Hex.
These are ~4.75mm thick, feel free to scale in Z if you want it a little thinner.
Used http://3dp.rocks/lithophane/ to generate replica of original game artwork from the Gloomhaven creators pack. Please only use this model for improving the Gloomhaven board game experience along with any remixes.
Tile Count:
2x (1 hex) Hot Coals
3x (2 hex) Hot Coals
3x (3 hex) Hot Coals
Cover picture by Filip Ksica
| Coals_1Hex_V2.stl | 2.1MB | |
| Coals_1Hex_V2_Thin.stl | 2.1MB | |
| Coals_2Hex_V2.stl | 4.7MB | |
| Coals_2Hex_V2_Thin.stl | 4.6MB | |
| Coals_3Hex_V2.stl | 6.7MB | |
| Coals_3Hex_V2_Thin.stl | 6.6MB | |
| Coals_V2_Thin_Full_Plate.stl | 37.9MB | |
| Gloomhaven_Coals_1Hex_Rev2.stl | 2.3MB | |
| Gloomhaven_Coals_2Hex.STL | 4.7MB | |
| Gloomhaven_Coals_3Hex.STL | 2.6MB |
