A hose glider I designed for my garden locker.
I also posted the full assembly for those willing to try to print it in place. I have never tried doing it.
If you wanna go my way (print one part at a time) then you need to print 4 rollers, 4 pins, 1 roller frame and one sliding frame (optional though). Do note that the pins intersect each other so you will need to cut them.
If you look at the gif you can notice that I printed the sliding frame with a z offset of -18 mm. I only needed the front part.
| Garden_hose_-_wall_glider.f3d | 344.5KB | |
| Roller-print_in_place.stl | 703.2KB | |
| Roller.stl | 146.6KB | |
| Roller_frame.stl | 229.8KB | |
| Roller_pin.stl | 77.8KB | |
| Sliding_frame.stl | 133.7KB |
