A set of screw fasteners for hoses, pipes or cables. I have created the sizes 10,20,30,40 and 50 mm, but it should be no problem to scale accordingly for intermediate values.
I recommend to scale always larger than smaller, so that the screw holes are not too small, so you need for example a fastener for a 26 mm hose you just take the 20mm fastener and scale it to 130%.
And here's a tip: turn the clamp to the side for printing, so you have a cleaner, easier and more stable print. (I have included a photo of my print on the printing plate for example).
x = 10mm /20mm /30mm /40mm /50mm
As always in my designs, I did my best to avoid the need for supports in printing and kept the print itself simple. Do the environment the favor and produce less waste.
| all.stl | 506.1KB | |
| hose_clamp_x_10.stl | 245.4KB | |
| hose_clamp_x_20.stl | 225.1KB | |
| hose_clamp_x_30.stl | 205.7KB | |
| hose_clamp_x_40.stl | 187.0KB | |
| hose_clamp_x_50.stl | 171.2KB |
