Hose Clamp 3D Printer Model
The file 'Hose Clamp 3D Printer Model' is (stl) file type, size is 269.0B.
The file 'Hose Clamp 3D Printer Model' is (stl) file type, size is 269.0B.
Available here: https://www.prusaprinters.org/prints/6758-hose-clamp
UPDATE: Wasn't totally happy with some of the teeth. Went through the process again to clean up some of the teeth and simplify the mesh further. Most recent is clamp_remix2.stl
Remix just to clean up and simplify the mesh a bit. Starting with SVG file, workflow was: GIMP, Inkscape, Blender. Set the z-depth to 5 mm (as opposed to ~6.4 mm in the original).
This will fit 3/4" OD tubing. If you are using it to secure a hose barb it may need to be scaled up (~105%) to fit around and clamp well. It is quite secure, but I wouldn't recommend for critical applications.
| 10x10x135.stl | 684.0B |
