This customizable parametric model should allow you to generate a barbed hose adapter for any set of inside diameter tubing. You can generate multiple outputs and create a manifold.
This can be used to connect various tubing sizes used in pond pumps, to give one example.
The latest version, v6, fixes a number of problems for larger hoses. The default settings create a vault adapter for two 1 inch ID pond hoses connecting to a single 1/2 inch ID tube. It should still work with other tubing sizes.
The generated supports should work quite well, particularly for printing in PLA with a good layer quality such as 0.2mm.
| BarbGenerator-250-175.stl | 505.0KB | |
| BarbGenerator-250-250.stl | 549.4KB | |
| BarbGenerator-375-250.stl | 622.4KB | |
| BarbGenerator-375-375.stl | 625.1KB | |
| BarbGenerator-500-250.stl | 781.4KB | |
| BarbGenerator-500-375.stl | 835.5KB | |
| BarbGenerator-625-100pvc.stl | 1003.6KB | |
| BarbGenerator-625-250.stl | 905.3KB | |
| BarbGenerator-625-2x375.stl | 1.1MB | |
| BarbGenerator-625-375.stl | 870.1KB | |
| BarbGenerator-750-375.stl | 1.0MB | |
| BarbGenerator-750-3x375.stl | 1.5MB | |
| BarbGenerator-750-750.stl | 1.1MB | |
| BarbGenerator-v5-1x910-1x910.stl | 603.8KB | |
| BarbGenerator-v6-2x910-1x500.stl | 905.1KB | |
| BarbGenerator-v6.scad | 14.3KB |
