Horus Kestrel Reinforced 3D Printer Model Free Download

Description Files (4)

Summary

First and foremost, this design is a remix and was inspired by the original Horus Kestrel.

http://horus-drones.com/
https://grabcad.com/library/horus-kestrel-3d-1

I had printed, built, and flew the original from grabcad.com and it was very fun to fly. However, I noticed some play in the rear part of the air-frame when performing yaw movements. For a printed vtail frame this is certainly to be expected. This is my attempt to mitigate but will admit it is not nearly as good as a rigid CF frame.

The only parts that differ from the original are:

Tail Plate
Main Body
Base Plate
Top Plate

Tail plate had been widened near the vblock section and has a M3 tie in to the main body
Main body has been extended near the rear to support the tie in to the tail plate, and includes M3 tie-ins to the top plate near the front and rear of the airframe
Top plate rear notch has been removed - adding in support for the tie in to the main body and includes additional zip tie slots to mount equipment on the top or bottom.
Base plate has the word HORUS removed - my printers continued to make a mess for some reason trying to print this.

Mobius mount:
http://www.thingiverse.com/thing:1686351

My current setup is as follows @ 796 grams

Flip 32 AIO
DYS 20A ESC's
Quanum (DYS) 2206 2000KV Motors
FrSKY X8R
Quanum Q58 VTX
Turnigy IC-120CS CCD Camera
Mobius Action Cam
2200mah LIPo

Baseplate_v2_fixed.stl	112.4KB
Body_v2_fixed.stl	421.8KB
Tailplate_v2_fixed.stl	464.8KB
Top_Plate_v2_fixed.stl	356.0KB

Horus Kestrel Reinforced 3D Printer Model

Summary

Tags

You might also like