For the Hornady Comparator series of measurement aids. Hornady sells a bullet insert for doing the CBTO measurement, a headspace set for measuring headspace, and a wider anvil that can be used to seat the case heads for measuring COAL (or headspace or seating depth).
This doesn't store a caliper (of your choice) or a Hornady/Stoney Point cartridge seating depth/comparator insert (and any associated cartridge cases).
This box will hold:
I would use a piece of tape to cover and hold the grub screw, otherwise the first time you tip the full box, or drop it, the grub screw will get lost. The grub screw is uncovered in the pictures above so its location is visible.
These were previously stored in an older red Lee box but the internal dividers were problematic.
| HornComparator_Lid2.stl | 422.7KB | |
| HornComparator_Storage2.stl | 271.8KB |
