3D model description
*This prototype is part of a bigger collection of other much more big, powerful and with counter rotation features horizontal/vertical wind turbines 3d printed portable devices that are included in our next Kickstarter Campaign https://www.kickstarter.com/projects/459381052/turbine-birds-project
We have updated our site for the events that will arrive soon https://www.kolibriwindstorm.com/
You can view this device in action at https://youtu.be/jjo36Dfuvqw // https://youtu.be/Uf1N270O5XU and for this prototype it will be used the following hardware,
Bearings (8mm x 22mm x 7mm)
2 units of an Uxcell RF500TB-12560 DC5V-12V 2300RPM-5600RPM no load speed 32mm diameter DC motor or equivalent
*Just type the name of the hardware in Amazon and you will find them.
**In my humble opinion, what makes this device more powerful is the design of the turbine, you can check it yourself and bring your opinion
| 10x1BigGear.stl | 199.5KB | |
| 10x1SmallGearDCDirect.stl | 88.7KB | |
| 3x1BigGear1.stl | 471.8KB | |
| 3x1DCConnectorSmallGear.stl | 12.4KB | |
| 3x1ShaftSmallGear.stl | 99.7KB | |
| 3x1SmallGear.stl | 93.8KB | |
| BottomArmsSupporter.stl | 12.4KB | |
| BottomBaseTraditionalDeviceSupporter.stl | 54.7KB | |
| BottomSupporterToBaseHolder.stl | 21.9KB | |
| Hub2.stl | 169.1KB | |
| MainBodyPlatformDCGearSystem.stl | 164.4KB | |
| ShaftPlatformHolder.stl | 12.4KB | |
| ShaftTail.stl | 10.4KB | |
| ShaftToBigGears.stl | 32.8KB | |
| ShaftToHub.stl | 31.5KB | |
| Tail.stl | 23.5KB | |
| TestBlade21.stl | 69.8KB | |
| UpperBaseBearingPlatformSupporter.stl | 101.9KB |
