Horizontal Full ATX pc case. Couldn't find a nice looking one with a transparent top panel so I decided to make one myself. Totally not worth the effort or material cost.
Video of making it: https://youtu.be/s-CzvRQWSOw
Printed on an ender 3 with standard PLA filament.
Because full ATX is so big, the case is cut into many pieces to fit on the build plate.
No extra screws required unless you want to screw the fans to the case instead of friction fit.
Motherboard is mounted with standard standoff screws that come with the motherboard.
Some part may seem they don't fit in the CAD file. That's because PLA has significant shrinkage at this scale and not all the parts are the same size so they shrink at different points.
Some other parts might actually just not fit because I messed up the files. Feel free to copy and modify the original onshape files here:https://cad.onshape.com/documents/b430a49b2e6298e686533a17/w/3c891e8e0e499cc851924958/e/8679c0831a9e1a7ac37e2821?renderMode=0&uiState=671717841dff0600dcba00ce
Ample amount of wood glue is needed to join the side panels and the bottom part. use duct tape as a clamp if you don't have woodworking clamps.
See roughAssem.blend for assembly and where each part goes.
Start with the motherboard and then the gpu panel and continue clockwise through the vertical panels. Lastly the bottom parts.
| backIOPanel.stl | 1.5MB | |
| BotBeam.stl | 13.6KB | |
| curve_bracket_x4.stl | 13.9KB | |
| frontIOHouse.stl | 146.5KB | |
| gpuOuter.stl | 17.9KB | |
| gpuPanel.stl | 20.2KB | |
| hardiskholder.stl | 115.5KB | |
| intakeFan1_1.stl | 1.5MB | |
| IntakeFan2_1.stl | 1.5MB | |
| leftIOPanel.stl | 255.0KB | |
| LeftPanel.stl | 468.3KB | |
| LegBridge_x2.stl | 7.7KB | |
| Legs_x4.stl | 112.0KB | |
| LRBeam_x2.stl | 7.7KB | |
| motherboard_-_BotLeft.stl | 75.4KB | |
| motherboard_-_BotRight.stl | 52.4KB | |
| motherboard_-_TopLeft.stl | 50.2KB | |
| motherboard_-_TopRight.stl | 41.0KB | |
| PSUBeam.stl | 33.4KB | |
| PSUBeamR.stl | 25.7KB | |
| PSUTrayL1.stl | 78.6KB | |
| PSUTrayL2.stl | 78.6KB | |
| PSUTrayR1.stl | 77.3KB | |
| PSUTrayR2.stl | 77.3KB | |
| radiator2.stl | 1.5MB | |
| radiatorPanel.stl | 55.3KB | |
| radiatorPanel1.stl | 1.5MB | |
| roughAssem.blend | 10.0MB | |
| roughAssemDoNotPrint.stl | 9.6MB | |
| TopBeam.stl | 15.1KB | |
| windowBot.stl | 21.4KB | |
| windowBR.stl | 3.2KB | |
| windowHolderBL1.stl | 4.3KB | |
| windowHolderL.stl | 22.5KB | |
| windowHolderTopRight.stl | 20.6KB | |
| windowTop.stl | 20.6KB |
