Hook Horns 3D Printer Model
The file 'Hook Horns 3D Printer Model' is (stl) file type, size is 613.9KB.
The file 'Hook Horns 3D Printer Model' is (stl) file type, size is 613.9KB.
I really liked Dietz1's sign of the horns model and I thought it would make a good wall hook.
The red hooks were the first revision. I measured the finish screws wrong, which is why they don't sit anywhere near flush.
Revision 2 corrected the hole size and added a 4th screw hole. This allows you to get 2 screws into a stud with 2 using sheetrock anchors for added strength.
Revision 3 added a second model, which gave me the choice of the horns facing the wall or facing the room.
Using the print settings below, the stock size (50x50mm base--see picture for size comparison to a Pepsi 1893 can) can easily support the 200ish feet of extension cords or a wet Prudhoe Bay-grade arctic parka.
| Hook_Horns_Down.stl | 642.7KB | |
| Hook_Horns_Up.stl | 643.6KB |
