Generic hooks for clothes and miscellaneous other things. Use 4mm fastening screws to attach to wall. Hook Elegant can also be used with double sided tape.
Hook Elegant is my final iteration of hook and comprises of two parts - the base plate and the hook itself. I print it successfully with my Cetus3D with no post-processing other than flashing it with a lighter to regain full gloss after the support has been removed.
Cetus3D settings: normal quality, 0.4mm nozzle, 0.2 mm layer height, 65% infill, printed with support lying on it's side.
Hook v1_2 is based on Hook_peen and has a lid for better looks on wall, prints well on my Cetus3D mk3 without any post processing, the lid snaps in place perfect after the hook is mounted on the wall. After the raft has been removed flash the bottom surface with a lighter to regain full gloss.
Cetus3D settings: normal quality, 0.4 mm nozzle, 0.20 mm layer height, 65% infill, Hook v1_2 printed on it's side with bottom support.
Hook peen (v1_0), does not need any raft or support and prints well on any printer.
| Hook_Elegant.stl | 193.0KB | |
| Hook_Elegant_base_plate.stl | 31.1KB | |
| Hook_Lid_v1_2.stl | 22.2KB | |
| hook_peen.stl | 213.7KB | |
| Hook_v1_2.stl | 223.3KB |
