Hood for 2.2 inch Mini HUD Head Up Display to prevent glare on windshield.
Recommend high temperature plastic (ABS works but slightly warped on hot summer day). PLA will probably have problems.
I suggest heavy duty double-sticky adhesive (3M VHB, Automotive trim-tape, etc) to attach the 3D printed part to the HUD face. It should just barely fit top-to-bottom so you can align it with the lower-edge of the upper-lip, then make sure it goes on centered left-to-right and push the tape firmly in place.
| 1_5_In_LCD_Hood_rounded.stl | 345.6KB |
