Chisel honing guide or jig. Top piece can be turned over which has grooves for 1/4, 1/2, 3/4 and 1 inch chisels as well as a 50mm plane blade.
Parts needed.
I made sure this one was designed small enough so small blades can still be honed at lower angles if needed.
The 5/16 bolts can probably be replaced with M8 bolts but I live in US and imperial what I'm used to :)
honing_guide.stl | 91.3KB | |
honing_guide_bushing.stl | 7.9KB | |
honing_jig_bottom.stl | 66.8KB | |
honing_jig_top.stl | 16.7KB |