Hongdian Nib Unit Storage Case 3D Printer Model
The file 'Hongdian Nib Unit Storage Case 3D Printer Model' is (stl) file type, size is 404.0KB.
The file 'Hongdian Nib Unit Storage Case 3D Printer Model' is (stl) file type, size is 404.0KB.
When I received some nib units from AliExpress, they came in the translucent holder shown in the picture, however, none of the ones ordered from Amazon did. I really liked the holder, and had someone point out that it could hold both the 26mm nib (typically called the #5 nib) unit and the 35mm nib (typically called the #6 nib) unit.
So I modeled this one, it is very slightly larger in diameter than the original, but I like the way it fits both size nibs (as shown in the pic).
Internally, there are two threads for the nib unit, and externally for the cap is a triple start 1mm pitch thread. I printed this with PLA+, with a 0.4mm nozzle and 0.08mm layer height.
| HDNibHolder-Body.stl | 380.7KB | |
| HDNibHolder-Cap.stl | 534.8KB |
