Honeycomb Ventilation Grille (150×100, 200×60) 3D Printer Model
The file 'Honeycomb Ventilation Grille (150×100, 200×60) 3D Printer Model' is (STL) file type, size is 172.5KB.
The file 'Honeycomb Ventilation Grille (150×100, 200×60) 3D Printer Model' is (STL) file type, size is 172.5KB.
These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van.
They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in place with 4 3.5 mm wood screws.
Flip the model so that the larger part touches the bed. You won't need supports and the parts are a straight fit after print.
Depending on the use (e.g. for outdoor use or inside a car) you should consider using PETG. I printed them in PLA+ and they are holding up well after a few months.
Consider offering me a beer. Beer fuels creativity and creativity creates good STLs :-)
<center>
<a href="https://www.thingiverse.comhttps://www.paypal.com/donate/?hosted_button_id=ARK54C7FNUYC8">
<img src="https://upload.wikimedia.org/wikipedia/commons/thumb/b/b5/PayPal.svg/1920px-PayPal.svg.png" width="200" height="auto"></a>
<p>
<a href="https://www.thingiverse.comhttps://www.paypal.com/donate/?hosted_button_id=ARK54C7FNUYC8">
<img src="https://media.printables.com/media/prints/206218/rich_content/f3dc21a8-19ea-496c-8e0d-0b68ebc04316/btn_donate_lg.gif">
</a></center>
| Griglia_150x100.STL | 237.6KB | |
| Griglia_200x60.STL | 191.3KB | |
| Griglia_200x60_TighterPattern.STL | 561.6KB |
