Honeycomb Raised Legs For Xtool D1 3D Printer Model
The file 'Honeycomb Raised Legs For Xtool D1 3D Printer Model' is (stl) file type, size is 28.2KB.
The file 'Honeycomb Raised Legs For Xtool D1 3D Printer Model' is (stl) file type, size is 28.2KB.
I have just made the design to fit my honeycomb, place one in each corner.
Space beneath to be able to fit a 3-4mm aluminiumsheet, raised legs so i only have to remove the honeycomb when switching to the roll, RA2 etc and no need to attached or detach the extra legs on the Xtool D1.
These have not been tested yet since my honeycomb are in the mail still but preparing, will update if needed when it arrives.
But if anyone want to give it a go feel free..
Dimensions -
Hight - 70mm, Honeycomb cutout at 65mm
With - 50mm and 65mm with the part you can screw into a waste-plate.
4mm free space beneath to fit aluminium sheet
| Xtoold1_raised_leg_honeycomb.stl | 142.7KB |
