Honeycomb Key Holder 3D Printer Model
The file 'Honeycomb Key Holder 3D Printer Model' is (stl) file type, size is 20.0KB.
The file 'Honeycomb Key Holder 3D Printer Model' is (stl) file type, size is 20.0KB.
This is a Honeycomb key chain holder I designed ( I know other versions exist, but I made this one from scratch so that I could make specific changes, by no means am I taking credit for this style holder, all I am taking credit for is my work and modifications, enjoy!)
This model was made to use a couple drywall screws/ anchors to hold into the wall.
I also modified it to work with standard rare earth magnets I picked up from Home Depot
8mm diameter x 3mm thick.
The key chain also uses a M5-0.80x10mm Flat Socket head cap screw
(Granger part number: 26LF53) link: https://www.grainger.com/product/GRAINGER-APPROVED-Metric-Socket-Flat-Head-Cap-26LF53
there should be two versions here one with varying depth and one that is flat
| Key_Chain_holder_mk1.stl | 46.2KB | |
| Key_Chain_holder_mk2.stl | 49.7KB | |
| Key_Chain_mk2.stl | 10.2KB |
