Made for the Honeycomb Bravo Throttle Quadrant GA throttle levers.
This attatchment for the Bravo's GA throttles, bulks out the heads of the levers to be more like the Cessna Citation CJ4's throttle levers. Thus giving a feel more closer to that of the CJ4.
My design is not as wide as the original design, though as with the original design, allow the use of the TOGA button.
I made this as I found the original design too tight on the heads and sticks and thus extremel difficult to remove and risking damage. I also didn't like the idea of warping or damaging the plastic of the 2nd lever to make it fit mirrored to the first. However I may eventualy do another wider redesign with a mirrored lever to completely replace the 2nd lever, so as to allow for both levers to fully simulate the CJ4's.
| Hopfot_Honeycomb_Bravo_CJ4_GA_Mod.stl | 195.2KB |
![[ROUND] QiCharger ( Anker PowerWave ) For Galaxy S9 3D Printer Model](https://cdn.3axis.co/assets/d5/5d/92/7a/d55d927a-09c1-4870-b6c2-a447e3ed4806/images/0e949ef7-00a0-4350-a6e1-f75a137e9e74_thumb.jpg)
