Honeycomb Alpha/Bravo Under-Desk Simple Mounting System 3D Printer Model
The file 'Honeycomb Alpha/Bravo Under-Desk Simple Mounting System 3D Printer Model' is (stl) file type, size is 72.0KB.
The file 'Honeycomb Alpha/Bravo Under-Desk Simple Mounting System 3D Printer Model' is (stl) file type, size is 72.0KB.
This is my design for a simple but effective under-desk mounting system for Honeycomb Alpha and/or Honeycomb Bravo equipment.
The system is made up of three components; only the left and right component are mandatory, the central component is optional but highly recommended to increase the stability of the support.
6 M4 screws with a length of 20mm are required to attach the supports to the device.
The original clamps (already present with the peripheral) are used for fixing to the desk.
For the central part I recommend applying a square of soft Velcro to avoid scratching the device.
| HoneycombMount_LEFT.stl | 102.3KB | |
| HoneycombMount_MIDDLE.stl | 102.8KB | |
| HoneycombMount_RIGHT.stl | 102.2KB |
