Use this bucket rack to drain from one bucket into another. Often used for draining honey.
The TinkerCad files are here:
https://www.tinkercad.com/things/6xcHbrelcE2
Thanks to BalinTech for the 5 gallon bucket STL. I used that to tweak my design and test the parts in 3D for fit.
https://www.thingiverse.com/thing:1938002
Updated Dec 20th 2018: Added left and right frame brackets for buckets with narrow rims at the top of the bucket so that the fit is tighter against the bucket. Use 'Frame Left - thin rim.stl' and 'Frame Right - thin rim.stl' if your bucket's rim edge is thinner than show in my pictures (about 2x bucket wall thickness). My original brackets were sized for a bucket rim that is 5-6x bucket wall thickness.
| Frame_Left.stl | 9.5KB | |
| Frame_Left_-_thin_rim.stl | 11.1KB | |
| Frame_Right.stl | 9.8KB | |
| Frame_Right_-_thin_rim.stl | 11.4KB | |
| Frame_Top.stl | 12.4KB |
![Tube Corner Joint (3 Way) [25mm] 3D Printer Model](https://res.3axis.co/025ac40f-0c58-48f3-83c0-64db51747566/images/da5f532f-528c-4997-b700-9bb6f5d738c5_thumb.jpg)
