This is a tweeter mount designed for easy printing with minimal supports that fits the stock mounting holes in the A-Pillar molding on (at least) 2005 Honda Elements, possibly other years as well.
The STL and SCAD files are sized to fit JBL GTO19T 0.75" tweeters, and include the tabs to lock it in place by turning it once inserted. For other tweeters, the diameter of the mount and tab sizes can be adjusted via parameters in the file.
This is a quick and dirty OpenSCAD, but hopefully is a good starting point for anyone else who might need this for their Element.
Initial test prints were made in PLA to get the sizing correct, final prints were PETG to be able to stand up to hot interior temperatures in the summer.
Note: I desoldered the wiring off the stock tweeters and soldered them to the wiring that came with the new tweeters to make a clean connection and reuse the stock plug connector.
| element_tweeter_mount.scad | 1.7KB | |
| element_tweeter_mount.stl | 269.6KB |
