These are the bushings that go between the fork and fork sleeves that hold the headlight and turn signals. These bushings are not available anymore.
This is UNTESTED - dimensions were taken from OEM parts so they should be good or close. The SCAD is there if you need to tweak.
Suggest printing in TPU at 60% or so infill with thick walls.
| cx500_fork_b_cush.scad | 453.0B | |
| cx500_fork_b_cush.stl | 35.2KB | |
| cx500_fork_cushion.scad | 1.1KB | |
| cx500_fork_cushion.stl | 48.5KB |
