Honda Civic EG, Del Sol Trailing Arm Bushing 3D Printer Model
The file 'Honda Civic EG, Del Sol Trailing Arm Bushing 3D Printer Model' is (f3d,stl) file type, size is 3.2MB.
The file 'Honda Civic EG, Del Sol Trailing Arm Bushing 3D Printer Model' is (f3d,stl) file type, size is 3.2MB.
This is a model of the 92-95 Honda Civic EG/ 93-97 Del Sol trailing arm bushing. I made two versions so you can pick how you want to install them, the first is the "Solid" one piece version which you would install like the energy suspension ones with a press tool or hydraulic press, this is difficult so I made an easy installation "Split" version so you can just slide them in from each side then secure them together with some long zip ties through the 4 holes I put in (Or you could use bolts and washers but I find it unnecessary).
Note: these are designed to use the stock metal ring and through bolt from your old bushing, so you'll have to remove the old rubber first, you can search youtube for easy methods to remove the old rubber (most people burn it out with a torch but you can use a sawzall too if you want).
I highly recommend printing in TPU since these bushings are usually made of polyurethane or rubber, I don't think plastic filament will work or be safe.
| Honda_Civic_EG_Del_Sol_Trailing_arm_bushing_Solid_Version.f3d | 1.8MB | |
| Honda_Civic_EG_Del_Sol_Trailing_arm_bushing_Solid_Version.stl | 608.5KB | |
| Honda_Civic_EG_Del_Sol_Trailing_arm_bushing_Split_Version.f3d | 1.2MB | |
| Honda_Civic_EG_Del_Sol_Trailing_arm_bushing_Split_Version.stl | 1.0MB |
