Designed to contain Wi-Fi ESP32 S2 Mini Type-C and 2 leds soldered to separate pins with 220ohm resistors.
Assemble instructions:
Software upload and configuration should be done before assembly ( At least for my board ), as you will not be able to manipulate buttons later with this design.
Using a HomeSpan library connects to homekit , and you are able to control LED's , can have some funny use like creating shortcuts for it to blink when you get an email , alarm went off , etc.
Here is a code example which is quite simular to what i've done:
You will probably want to hardcode wifi creds with homeSpan.setWifiCredentials.
| 14.stl | 148.0KB | |
| 34.stl | 535.5KB |
