The roller blind mount was designed as an extension to allow the blind to be installed on a window with an automatic ventilation system. This makes the entire roller blind hang slightly lower.
The clamp mechanism, which works like a cable tie, also functions well with the mount in my tests. However, you will need a PowerStrip adhesive to apply to the back surface as mounting tape, similar to the original setup.
I use the double-sided mounting tape from Aldi's Workzone, which has the advantage of being easily removable without leaving residue.
The part was printed in PETG, and there are built-in supports that need to be trimmed away. You can see the position in the screenshots.
| AldiHalter_Version3.f3d | 418.6KB | |
| V3.3mf | 12.9KB | |
| V3.stl | 48.0KB |
