Hollow Skull Container 3D Printer Model
The file 'Hollow Skull Container 3D Printer Model' is (stl) file type, size is 25.1MB.
The file 'Hollow Skull Container 3D Printer Model' is (stl) file type, size is 25.1MB.
My first major project getting to learn 3D modelling. Its a pretty heavy remix of MacGyvers Sliced Human skull. Mostly for learning and just for fun. While my printer is tuned pretty good, and have made 4 so far without incident (no pics but a couple other colors) I still needed to do some light post-processing for each. Results will vary no doubt.
Insert (or remove) the pin from the top of the base piece through one hole then the other. Connecting the jaw and pin (and taking it apart) are a little tricky sometimes. I push them to one side or the other and you can bend the jaw just a little bit to get it on or off. I wanted it a bit tight so the jaw would hold open and closed.( see post processing)
Any questions don't be afraid to ask. Open to suggestions and re-remixes. I plan on making some overall improvements and other versions when I have the time.
If you don't see the pictures I uploaded, I put them in my "Makes" folder too
update 1, I added a new bottom piece. the pin should easily slide in from the side now, which puts the jaw in a slightly different position now.
update 2, added a new front version with eye and nose holes.
| Hollow_skull_bottom.stl | 9.3MB | |
| Hollow_skull_bottom_new_hole_position.stl | 3.7MB | |
| Hollow_skull_front.stl | 10.7MB | |
| Hollow_skull_front_eye+nose_holes.stl | 6.1MB | |
| Hollow_skull_left_lobe.stl | 3.7MB | |
| Hollow_skull_right_lobe.stl | 3.6MB | |
| Jaw_final.stl | 3.5MB | |
| Jaw_pin.stl | 217.1KB |
