My take on a hold-down clamp.
I used a 3.5" 1/4-20 hex-head bolt.
A 1/4-20 nut gets glued and pressed into the knob.
2021-01-11
2022-02-10
| 0.25-20_Pentalobe-TopNut_-_Knob.stl | 4.8MB | |
| 0.25-20_Pentalobe_-_Knob.stl | 5.3MB | |
| T-TrackClamp_V2_-_Clamp.stl | 7.3MB | |
| T-TrackClamp_V2_-_Collar.stl | 2.5MB | |
| T-TrackClamp_V2_-_Collar2.stl | 2.5MB |
