I remixed this from the original Hogwarts castle stl at https://www.thingiverse.com/thing:2764044
(Pencil, post-it notes, and paperclip for size reference)
It has two areas for pencil holders, a paperclip tray, and a post-it note tray in the front. It's a little big for most desks but it's so awesome I don't care. The original file had some minor imperfections and I was able to clean it up a bit, including adding arched windows to the tower. I put in a window-shaped hole in the back of the tower for a USB light plug to come out.
Final Size (L/W/H) ~378 x 164 x 315 mm (largest piece to print = 189 x 161 x 259 mm)
If you decrease the size just remember that the post-it note holder in the front may not fit a true post-it note pack anymore but you could use it for other small items.
Troubleshooting: If your printer has a filament runout detector on top (like my Sovol S01), make sure your printer can print up to 259mm height without breaking the filament. I had to print an adapter to raise the sensor up to decrease the tension when the nozzle was moving left to right at that height.
| Front_Corrected_Piece_Hogwarts_desk_organizer_and_lamp_pt3.stl | 200.7KB | |
| Hogwarts_desk_organizer_and_lamp_back_piece_.stl | 163.6KB | |
| Hogwarts_desk_organizer_and_lamp_turrett.stl | 45.4KB | |
| Middle_Piece_Hogwarts_desk_organizer_and_lamp_pt3.stl | 798.3KB |
