Hi,
This is a "simple" design of the footbridge for Goathland-Hogsmeade, thought to be as easy as possible to print (i tried anyway).
It has also the platforms included for the other side of the station
I know it's not the best looking but my printer is an FDM and i need to make it a bit rough to print ok.
The footbridge has been designed in conjunction to fit my others Goathland parts
You can find them here: https://www.thingiverse.com/thing:4839884
It's made to fit with two Hornby track with a R8072 turnout and R606 curve (the tracks are about 65mm apart from the middle of the rails)
For the stairs i used some support and layed them flat.
Have a nice build and don't hesitate to post your makes.
Mega folder for your tidyness needs (also includes everything else i made for Goathland)
https://mega.nz/folder/8zwEwCLa#unPZPEHsQu0puKcLRDHKXQ
Foot note: this design is distributed for free you cannot print and then sell without my written consent.
| foot_bridge_armature.STL | 361.1KB | |
| foot_bridge_armature_opened.STL | 340.3KB | |
| foot_bridge_path_down.STL | 11.8KB | |
| foot_bridge_sides_other_path_down.STL | 39.7KB | |
| foot_bridge_sides_path_down.STL | 39.7KB | |
| foot_path_up_there.STL | 19.4KB | |
| plateformes_annex_right_wing_39mm.STL | 24.7KB | |
| plateformes_last_left_39mm.STL | 24.7KB | |
| plateforme_other_side.STL | 27.6KB | |
| side_middle.STL | 7.0KB |
