Wall-mounted rack for hockey sticks. Works for both senior and junior sticks. Mount them next to each other to get an extra slot per pair of printouts.
I also made matching plates with numbers (#1-31) that can easily be printed in two colors using a single nozzle as the numbers are protruding from the base. There are no holes for screws in the number plates so they have to be mounted using double adhesive tape.
Note: One of the printouts in the image is an earlier prototype with narrower "bumps".
Update: Added units with three and six slots and added number plates.
| Hockey_stick_rack.stl | 69.9KB | |
| Hockey_stick_rack_3slots.stl | 75.2KB | |
| Hockey_stick_rack_6slots.stl | 91.4KB | |
| Hockey_stick_rack_numbers_1-3.stl | 62.4KB | |
| Hockey_stick_rack_numbers_12-15.stl | 73.9KB | |
| Hockey_stick_rack_numbers_16-19.stl | 85.8KB | |
| Hockey_stick_rack_numbers_20-23.stl | 101.4KB | |
| Hockey_stick_rack_numbers_24-27.stl | 94.2KB | |
| Hockey_stick_rack_numbers_28-31.stl | 116.5KB | |
| Hockey_stick_rack_numbers_28-31_end.stl | 116.5KB | |
| Hockey_stick_rack_numbers_4-7.stl | 59.8KB | |
| Hockey_stick_rack_numbers_8-11.stl | 79.4KB |
