Hobson’s Joint 3D Printer Model
The file 'Hobson’s Joint 3D Printer Model' is (stl) file type, size is 71.6KB.
The file 'Hobson’s Joint 3D Printer Model' is (stl) file type, size is 71.6KB.
In order to finish this you will need 4 x skater bearings (22mm OD, 8mm ID, 7mm thick) 6 x rods 8mm by 10mm 2 x rods 8mm by 150mm
you can find a video explaining more at https://youtu.be/DUAQ1E5S4eg
I have added the part needed to create a Cardan joint it s fastened together with an m4 nut and bolt
You can find a video on this at https://youtu.be/QTZhMY_e89g
| Cardan.stl | 53.5KB | |
| cradle.stl | 27.2KB | |
| drum.stl | 54.6KB | |
| elbow.stl | 71.3KB | |
| handle.stl | 54.6KB | |
| spacer_30.stl | 25.1KB | |
| spacer_40.stl | 25.1KB | |
| spacer_50.stl | 25.1KB |
