HO Train Track Wall Mount Remix For Fast Printing 3D Printer Model
The file 'HO Train Track Wall Mount Remix For Fast Printing 3D Printer Model' is (stl) file type, size is 14.1KB.
The file 'HO Train Track Wall Mount Remix For Fast Printing 3D Printer Model' is (stl) file type, size is 14.1KB.
Working on a fix, this bracket is too close to the wall and will not let the train clear as it goes into a corner
This is a remix of Zpinkerton1's mount. I wanted something that would print a little faster and not be so big. the track and trains are decently light, so i cut down the mounting wall size. If you want/need extra strength increase your wall rows, 6 rows should give you a solid wall on the mounting side.
I also didn't want the primary shear plane to be in line with the z axis like the original mount.
There is enough room between the diagonal supports to fit a screw driver or long bit.
Screw holes are sized to fit #8-32 screws.
I can print 18 at a time on my Ender 3 pro when on its side. This can be printed without supports, it comes out mostly clean, but sometimes i get a few hangers, if you want/need it to be really clean, do tree supports.
| track_mount_solid.stl | 50.6KB |
