HO Slot Car Track Skirts V2 3D Printer Model
The file 'HO Slot Car Track Skirts V2 3D Printer Model' is (stl,scad) file type, size is 148.2KB.
The file 'HO Slot Car Track Skirts V2 3D Printer Model' is (stl,scad) file type, size is 148.2KB.
These are skirts for HO slot car tracks. These can be attached to curved or straight track sections, where a skirt can either slant down from the top of the track or be flat with the top of the track.
Each skirt has a clamp which can be firmly attached to the underside of the track using a #4 sheet metal screw if desired, as in the case where the track is suspended in the air by a support. If a screw is used, the track may not lay completely flat on a surface, unless you clip the end off of the screw after it has been attached. But, if you intend to lay the track flat onto a surface, you don't need to use a screw for attachment.
If the name of the STL file has one number at the end, it is the length in inches of a straight track skirt. If it has two numbers, it indicates the radius in inches and angle in degrees.
The OpenSCAD files are provided to allow for special angles, lengths and skirt widths.
You may also be interested in my track (SAFER) barrier design at https://www.thingiverse.com/thing:5874984 or my track supports at https://www.thingiverse.com/thing:6589769.
important note: There is a newer version of the flat track skirts that can be used with a newer version of the track barriers at There is a newer version that can be used with a flat track skirt at https://www.thingiverse.com/thing:6714506.
| StraightTrackFlatSkirt2-12.stl | 5.4KB | |
| StraightTrackFlatSkirt2-3.stl | 5.4KB | |
| StraightTrackFlatSkirt2-6.stl | 5.4KB | |
| StraightTrackFlatSkirt2-9.stl | 5.4KB | |
| StraightTrackFlatSkirt2.scad | 1.3KB | |
| StraightTrackSkirt2-12.stl | 5.2KB | |
| StraightTrackSkirt2-3.stl | 5.2KB | |
| StraightTrackSkirt2-6.stl | 5.2KB | |
| StraightTrackSkirt2-9.stl | 5.2KB | |
| StraightTrackSkirt2.scad | 1.3KB | |
| TrackFlatSkirt2-12-30.stl | 14.3KB | |
| TrackFlatSkirt2-12-45.stl | 24.3KB | |
| TrackFlatSkirt2-3-30.stl | 14.3KB | |
| TrackFlatSkirt2-3-45.stl | 24.3KB | |
| TrackFlatSkirt2-6-30.stl | 13.9KB | |
| TrackFlatSkirt2-6-45.stl | 24.1KB | |
| TrackFlatSkirt2-9-30.stl | 13.9KB | |
| TrackFlatSkirt2-9-45.stl | 23.5KB | |
| TrackFlatSkirt2.scad | 1.5KB | |
| TrackOutFlatSkirt2-12-30.stl | 11.2KB | |
| TrackOutFlatSkirt2-12-45.stl | 19.4KB | |
| TrackOutFlatSkirt2-15-30.stl | 11.0KB | |
| TrackOutFlatSkirt2-15-45.stl | 18.8KB | |
| TrackOutFlatSkirt2-6-30.stl | 11.0KB | |
| TrackOutFlatSkirt2-6-45.stl | 19.2KB | |
| TrackOutFlatSkirt2-9-30.stl | 11.2KB | |
| TrackOutFlatSkirt2-9-45.stl | 19.4KB | |
| TrackOutFlatSkirt2.scad | 1.5KB | |
| TrackOutSkirt2-12-30.stl | 9.6KB | |
| TrackOutSkirt2-12-45.stl | 16.9KB | |
| TrackOutSkirt2-15-30.stl | 9.4KB | |
| TrackOutSkirt2-15-45.stl | 16.3KB | |
| TrackOutSkirt2-6-30.stl | 9.4KB | |
| TrackOutSkirt2-6-45.stl | 16.7KB | |
| TrackOutSkirt2-9-30.stl | 9.6KB | |
| TrackOutSkirt2-9-45.stl | 16.9KB | |
| TrackOutSkirt2.scad | 1.5KB | |
| TrackSkirt2-12-30.stl | 12.7KB | |
| TrackSkirt2-12-45.stl | 21.8KB | |
| TrackSkirt2-3-30.stl | 12.7KB | |
| TrackSkirt2-3-45.stl | 21.8KB | |
| TrackSkirt2-6-30.stl | 12.3KB | |
| TrackSkirt2-6-45.stl | 21.6KB | |
| TrackSkirt2-9-30.stl | 12.3KB | |
| TrackSkirt2-9-45.stl | 21.0KB | |
| TrackSkirt2.scad | 1.5KB |
