HO Slot Car Track Skirts And Barriers V3 3D Printer Model
The file 'HO Slot Car Track Skirts And Barriers V3 3D Printer Model' is (stl,scad) file type, size is 133.6KB.
The file 'HO Slot Car Track Skirts And Barriers V3 3D Printer Model' is (stl,scad) file type, size is 133.6KB.
This design provides a set of one inch flat track skirts, where there are also barriers that can be placed on the outer edge of the skirt. This was made through a modification to other designs, where the barrier radii are one inch greater than the outer radii of curved track sections and have slightly different connector tabs than previous versions in order to firmly connect to the skirt.
The OpenSCAD files are provided and provide parameters that can be adjusted, such as to make skirts wider or narrower than one inch and barriers with other radii and spanning angles.
The skirts for the inner sections of curved track are provided by other designs, specifically see https://www.thingiverse.com/thing:5732903
| OuterFlatSkirtV3-12-30.stl | 17.9KB | |
| OuterFlatSkirtV3-12-45.stl | 29.6KB | |
| OuterFlatSkirtV3-15-30.stl | 17.7KB | |
| OuterFlatSkirtV3-15-45.stl | 29.0KB | |
| OuterFlatSkirtV3-6-30.stl | 17.7KB | |
| OuterFlatSkirtV3-6-45.stl | 29.4KB | |
| OuterFlatSkirtV3-6-60.stl | 35.6KB | |
| OuterFlatSkirtV3-9-30.stl | 17.9KB | |
| OuterFlatSkirtV3-9-45.stl | 29.6KB | |
| OuterFlatSkirtV3-9-60.stl | 35.8KB | |
| OuterFlatSkirtV3.scad | 1.7KB | |
| StraightFlatSkirtV3-12.stl | 6.1KB | |
| StraightFlatSkirtV3-3.stl | 6.1KB | |
| StraightFlatSkirtV3-6.stl | 6.1KB | |
| StraightFlatSkirtV3-9.stl | 6.1KB | |
| StraightFlatSkirtV3.scad | 1.5KB | |
| TrackBarrierV3-10-30.stl | 17.6KB | |
| TrackBarrierV3-10-45.stl | 23.8KB | |
| TrackBarrierV3-10-60.stl | 29.7KB | |
| TrackBarrierV3-12.stl | 4.2KB | |
| TrackBarrierV3-13-30.stl | 17.2KB | |
| TrackBarrierV3-13-45.stl | 23.4KB | |
| TrackBarrierV3-16-30.stl | 17.4KB | |
| TrackBarrierV3-16-45.stl | 23.6KB | |
| TrackBarrierV3-3.stl | 4.2KB | |
| TrackBarrierV3-6.stl | 4.2KB | |
| TrackBarrierV3-7-30.stl | 17.8KB | |
| TrackBarrierV3-7-45.stl | 23.8KB | |
| TrackBarrierV3-7-60.stl | 29.6KB | |
| TrackBarrierV3-9.stl | 4.2KB | |
| TrackBarrierV3.scad | 2.9KB |
