This is my model of the Auburn Washing Train Station as it was first for the Northern Pacific Railroad. There is no paint used on my model. I used layered printing on the walls and doors to achieve the color break that the station had.
A big thanks to Nathan Rich for researching and obtaining the blue prints.
All of my models are Free, Tips are not necessary...but they are fun.
What do you need modeled?
Happy Printing!
Kim
| Auburn_Station.skb | 16.4MB | |
| Auburn_Station.skp | 16.4MB | |
| Chimneys.stl | 177.2KB | |
| Doors.stl | 513.1KB | |
| Doors_for_Layered_Extrusion.stl | 516.0KB | |
| Downspouts.stl | 234.9KB | |
| Downspouts_From_Gables.stl | 1.6MB | |
| Downspout_Bases_on_Foundation.stl | 744.3KB | |
| Foundation_LH.stl | 130.0KB | |
| Foundation_RH.stl | 140.3KB | |
| Gutters.stl | 156.6KB | |
| Roof_-_Center_Section.stl | 4.9MB | |
| Roof_-_End_Gables.stl | 396.8KB | |
| Roof_-_Main_LH.stl | 15.6MB | |
| Roof_-_Main_RH.stl | 15.8MB | |
| Station_Decor.stl | 3.9MB | |
| Walls_-_End_Gables.stl | 399.8KB | |
| Walls_-_Front__Rear_Gables.stl | 1.9MB | |
| Walls_-_LH.stl | 8.5MB | |
| Walls_-_RH.stl | 8.6MB | |
| Windows_for_Layered_Extrusion.stl | 850.1KB | |
| Windows_No_Glass.stl | 616.4KB |
