HiVi Inductor Mounts Hivi 3.1a 3D Printer Model
The file 'HiVi Inductor Mounts Hivi 3.1a 3D Printer Model' is (stl) file type, size is 36.6KB.
The file 'HiVi Inductor Mounts Hivi 3.1a 3D Printer Model' is (stl) file type, size is 36.6KB.
This set of mounts will significantly lower the amount of crosstalk/signal induction between the inductors on the HiVi 3.1a crossover
Some extensive testing and design went into determinomg of the optimal angles and heights of the inductors. These have not just been randomly chosen or guessed at. the effects were measured and phase angles of multiple inductor signals were also taken into account..
note that although this sould work with all versions variations the crossover, I did use the coil values from ScottS / sehlin sounds solutions - search him if you are interested in crossover mods for the hivi 3.1a
There are no critical settings for the print. i used 15% infill and ABS filament
I decided to avoid carbon fiber or any filaments with metal in them. Though any non-flexible filament will work, ABS and ASA were top on my material list just for the added benefit of them being able to handle more heat than PLA and PETG although those will certainly work as well.
| L1-Mount.stl | 64.5KB | |
| L2-Mount.stl | 17.7KB | |
| L3-Mount.stl | 64.8KB |
