HIVE – Hex Drawer With Mesh Front 3D Printer Model
The file 'HIVE – Hex Drawer With Mesh Front 3D Printer Model' is (stl) file type, size is 165.9KB.
The file 'HIVE – Hex Drawer With Mesh Front 3D Printer Model' is (stl) file type, size is 165.9KB.
This is a replacement part for the drawer and handle prints in O3D's HIVE hexagonal drawer system. If you want to print this, you'll need to download that project and print the HIVE module so you have something to put this drawer inside.
Most of the changes I made were improvements that suited my own preferences but I thought some others might be looking for the same things I was in the original design.
First off; the handle is now no longer a separate print and is integrated with a 45* overhang on the bottom that should make it printable without supports so you don't need extra materials like superglue to assemble this build like you do in the original version. I also adjusted the fitup to be slightly more loose and added a tab to the top lip that engages when you fully close the drawer. This means you can leave the drawer out and slide it fairly easily, then push it all the way in if you don't want your stuff to tip out.
If you want smaller drawers, check out my horizontally subdivided drawers.
| deep_drawer_with_mesh_and_integrated_handle.stl | 442.0KB |
![Small Part Drawer Box [Customizable] 3D Printer Model](https://cdn.3axis.co/assets/e0/54/48/5f/e054485f-8e65-4d10-995f-a9e3c419a75c/images/cd9b37fd-e938-44f4-9759-b847a305e88a_thumb.jpg)
