HISPEEDIDO N64 NOCUT BASE 3D Printer Model
The file 'HISPEEDIDO N64 NOCUT BASE 3D Printer Model' is (stl) file type, size is 14.3KB.
The file 'HISPEEDIDO N64 NOCUT BASE 3D Printer Model' is (stl) file type, size is 14.3KB.
This is an alternative base for the HISPEEDIDO N64 HDMI mod.
I found that the UltraHDMI No Cut mod prints did work, though the shape of the base print did not quite match the footprint of the HISPEEDIDO kit.
So here is my modified version for that kit.
It uses the same AV shroud, so get that from the original UltraHDMI print page.
You can see the difference between the UltraHDMI and my version in the pictures.
My version uses ~6g (2.00m) of filament, which is slightly more than the original, but I use thin double-sided tape, so I wanted to ensure that the base had more surface area to mount the board (the larger flat areas at the front are triangular to save material)
I also recommend putting a little thermal pad on the left-most IC to protect it from the metal shield in the N64 (and to assist with heat dissipation).
| HISPEEDIDO_N64_NOCUT_BASE.stl | 157.5KB |
