Hires Buddha (fixed Casting Marks On Thailand Buddha By Stronghero) 3D Printer Model
The file 'Hires Buddha (fixed Casting Marks On Thailand Buddha By Stronghero) 3D Printer Model' is (stl) file type, size is 46.2 MB.
The file 'Hires Buddha (fixed Casting Marks On Thailand Buddha By Stronghero) 3D Printer Model' is (stl) file type, size is 46.2 MB.
The "Thailand Buddha" model is probably the most amazing, high quality, 3d scanned buddha on thingieverse. Unfortunately, when I printed it out, I discovered that you could clearly see the thick mold casting seams from the original piece that was 3d scanned.
I ran through and quickly fixed the affected areas. It's may not look perfect as a model if you zoom in, but looks great even at fairly large (to me at 180mm) prints . Printed model in the pictures above was printed 80mm tall at 0.1mm as my first test print.
I had to slice the bottom a wee bit to make it flat enough sit without supports.
Printed just fine without supports for me (at 0.1mm layer)
Updated 6/9/17: Remeshed and reuploaded.
| buddha_fixed4.stl |
