Hinge 50x90mm – Print In Place 3D Printer Model
The file 'Hinge 50x90mm – Print In Place 3D Printer Model' is (3mf,stl) file type, size is 272.8KB.
The file 'Hinge 50x90mm – Print In Place 3D Printer Model' is (3mf,stl) file type, size is 272.8KB.
This hinge is heavily inspired by "Charnière" by ThierryEz. I re-modeled it and customized it to my specific project.
After print you gently brake the two parts free from each other around the pivot, so that they can move and function as a hinge.
The nominal gap between the parts in the pivot is 0,2mm. I found that perfect for my printer and settings; it was easy to brake the parts free from each other without risking breaking the plastic, and no slack between the parts can be felt when operating the hinge.
In the files there are versions with smaller nominal gap - 0,1mm and 0,15mm - if you find the 0,2mm gap too generous.
Print laying flat on bed. No post printing operation needed, apart from gently braking the two halfs free to pivot against each other.
| hinge_50x90.3mf | 132.8KB | |
| hinge_50x90_0.1.stl | 727.5KB | |
| hinge_50x90_0.15.stl | 727.4KB | |
| hinge_50x90_0.2.stl | 727.5KB |
