Due to a lot of requests, here's the files for the high quality TF2 shotgun I designed for printing!
To see some questions I answered about the process you can go to the reddit thread here:
https://www.reddit.com/r/tf2/comments/c8eox7/i_3d_printed_and_painted_the_stock_shotgun/
To see some pictures of the process of making this prop (and more finished pics at the end!) you can go to my imgur album here:
https://imgur.com/a/2649tgN
The barrel and tube are 1" and 3/4" PVC pipe which are 13 1/8" and 11 1/4" respectively.
Some notes on printing:
I designed the part in inches while most 3D printing slicers use mm as the units, (which means the model is going to look really tiny in the slicer!) so there are two options to fix this:
The last two pictures are adapters for attaching the PVC pipes to the body of the gun. I epoxied everything together for my prop.
I printed everything at 0.12mm to achieve the highest quality surface finish before I used filler primer and sandpaper to make everything smooth like you see in the first picture.
If anyone has any questions feel free to ask!
| 1_adapter.stl | 33.5KB | |
| 3_4_adapter.stl | 37.1KB | |
| barrel_spacer.stl | 12.3KB | |
| body.stl | 194.8KB | |
| handle.stl | 388.8KB | |
| pump.stl | 482.8KB | |
| pump_cap.stl | 47.7KB | |
| trigger.stl | 43.1KB | |
| trigger_guard.stl | 335.1KB | |
| trigger_guard_plate.stl | 30.0KB | |
| tube_cap.stl | 115.7KB | |
| tube_front.stl | 27.1KB |
