High Flow, 2 Channel Peristaltic Pump 3D Printer Model
The file 'High Flow, 2 Channel Peristaltic Pump 3D Printer Model' is (3mf,stl) file type, size is 5.0MB.
The file 'High Flow, 2 Channel Peristaltic Pump 3D Printer Model' is (3mf,stl) file type, size is 5.0MB.
Peristaltic pump with two flow channels, each of which capable of flowing up to 5 liters per minute, although recommended continuous flow rate closer to 2 liters per minute.
Initially designed to be used with an electric drill as the drive motor, but I've also included a planetary gear set for an integrated DC motor. See link above for full info.
| ContactPins.3mf | 122.2KB | |
| Hub_Blank.stl | 1.0MB | |
| Hub_MotorDrive.stl | 389.8KB | |
| Hub_Planetary.stl | 1.2MB | |
| Hub_SQ_p5.stl | 96.1KB | |
| MotorMount.stl | 713.7KB | |
| Pin_Long.stl | 208.0KB | |
| Pin_Short.stl | 203.5KB | |
| PlanetaryPlanet.stl | 923.0KB | |
| PlanetaryRing.stl | 1.9MB | |
| PlanetarySet.3mf | 942.8KB | |
| PlanetarySun.stl | 602.0KB | |
| Rotor.3mf | 228.5KB | |
| Rotor.stl | 895.5KB | |
| StatorA.3mf | 384.7KB | |
| StatorA.stl | 1.3MB | |
| StatorB.3mf | 352.8KB | |
| StatorB.stl | 1.2MB |
