The file 'High Clearance CR10 Fang 40mm 50mm Flat Fans 3D Printer Model' is (gcode,idea,stl) file type, size is 29.2 MB.
This is a remix for the Creality CR-10 & CR-10S
It gives great access and visibility of the print head while printing.
This is not the OEM Fang and uses different more powerful 40mm and 50mm standard fans
The new fans have to be soldered in to replace the stock part cooling fan.
Includes the High Clearance Fangs no catching on the model.
The large cavity under the part cooling fan help to prevent pressure push back from the fan.
Files Included:
Gcode for a CR-10 0.1 and 0.2 layer heights with supports
Ideamaker project files with custom supports
STLs of just the fangs
NOTE: if you use the gcode, make sure there is no bed clips 7cm in both directions from the front left corner of the build plate.
You can print this without supports but it does come out a lot nicer with them.
| 10h30m_Fang_CR-10_Short_40mm_Space_PLA_ICE_0p1.gcode |
| 13h16m_Fang_CR-10_Short_50mm_Space_PLA_ICE_0p1.gcode |
| 5h40m_Fang_CR-10_Short_40mm_Space_PLA_ICE_0p2.gcode |
| 7h6m_Fang_CR-10_Short_50mm_Space_PLA_ICE_0p2.gcode |
| Fang_CR-10_Short_40mm_Space.idea |
| Fang_CR-10_Short_50mm_Space.idea |
| Fang_CR10_Short_40mm_Space.stl |
| Fang_CR10_Short_50mm_Space.stl |
