HGX Lite Direct Drive Adapter V5 Anycubic Kobra & Vref Check Tool 3D Printer Model
The file 'HGX Lite Direct Drive Adapter V5 Anycubic Kobra & Vref Check Tool 3D Printer Model' is (stl,xlsx) file type, size is 2.3MB.
The file 'HGX Lite Direct Drive Adapter V5 Anycubic Kobra & Vref Check Tool 3D Printer Model' is (stl,xlsx) file type, size is 2.3MB.
This is a direct drive adapter for the HGX Lite, made for the Kobra Max.
According to the specifications, it is directly attached to the V5 hotend, so it might be compatible with printers other than the Kobra.
The PTFE tube has also been replaced with a new one due to the change in the heat break.
No reversal setting was necessary for the motor.
When assembling, the hotend cable is unplugged.
The parts I replaced are listed below.
HGX lite + NEMA 14 moter
https://ja.aliexpress.com/item/1005006356225640.html?spm=a2g0o.order_list.order_list_main.150.2571585aZnkL6c&gatewayAdapt=glo2jpn
Bimetal HeatBreak Anycubic V5
https://ja.aliexpress.com/item/1005005940952805.html?spm=a2g0o.order_list.order_list_main.43.2571585aZnkL6c&gatewayAdapt=glo2jpn
I created an Excel file that outputs the Vref value when the ampere and resistance values are entered to assist with motor drive settings.
Based on this tool, I adjusted the DCV of the motor drive with a tester. (The default values are for a 1A NEMA14 motor.)
| V5_hgx_lite_adapter.stl | 2.2MB | |
| Vref_check.xlsx | 1.5MB |
