I wanted to put a PC4-M6 fitting on top of my HGT Extruder (cheap but great extruder, found on Amazon/AliExpress), but it does not come with threads on the top, only on the bottom.
This adapter bracket uses one screw, the screw on the top-left of the front of the extruder, which does not actually DO anything. It just goes straight through and screws into the brass threads on the back. I did have to lengthen it, the stock screw is M3x~22mm and barely too short. I used a M3x30mm, but 25mm would probably work as well.
STL is oriented the way I printed it, and STEP file is included too. If anything is wrong or you want something changed (if there are any other HGT extruder owners out there), I may be able to change/fix it.
| PC4-M6_Adapter_Plate_V3.0.step | 179.5KB | |
| PC4-M6_Adapter_Plate_V3.0.stl | 445.6KB |
